We weave, laminate and finish PE tarpaulin from 50 to 300 GSM on our own lines in Shandong. PVC we supply to specification, 475 to 745 GSM. Buyers arrive with a surface to cover and a way of tying it down; they leave with a weight, a made width and a seam plan.
Weaving, lamination, cutting and finishing under one roof.
>100 million m²
Tarpaulin output a year, PE and PVC together.
2.0 / 4.0 m
The widest PE sheet we form in a single pass — no centre seam.
5 t
Minimum order, quoted per specification rather than per container.
What we make — and what we deliberately don't.
A supplier who says yes to everything is either reselling or farming it out. Here is where our line sits, so you can plan the rest of your own process around it.
Leaves the plant
Woven PE from 50 to 300 GSM, laminated on our own lines
PE sheet at 2.0 m and 4.0 m, formed in a single pass
PVC tarpaulin 475–745 GSM in 3.2, 4.0 and 5.0 m
Cut panels, eyelets at your spacing, heat-sealed seams, reinforced corners
Print, quoted and scheduled as a separate process
Goes back to you
Sewn hems, webbing loops and zip openings — stitched downstream
Drainage fittings, elastic edges and rope-reinforced hems
Retail packing, hang tags and barcode labels
Installation, rigging and on-site repair
Orders under 5 t per specification
Two polymers, two production routes.
PE and PVC fail for different reasons, so they are specified differently. Most of our buyers need one of each, which is why both stay in the catalogue.
PE · poly
Woven HDPE, laminated both faces.
Weight
50–300 GSM
Made width
2.0 m and 4.0 m, one pass
Colour
white, silver, blue, green, orange, black, camo
Cold
service floor −40 °C
Lead time
30 days per container, standard colours
PVC · vinyl
Coated scrim, supplied to specification.
Weight
475–745 GSM
Made width
3.2, 4.0 and 5.0 m
Colour
white, blue, green, grey, black, clear
Heat
service ceiling 70 °C
Lead time
45 days
MOQ is 5 t per specification on both routes. Samples are free; freight is yours.
From yarn to a labelled roll.
Three stages, one building. Anything that needs a needle happens after the roll leaves us.
01
Weaving
HDPE tape is woven into cloth on circular looms. Tape width and picks per inch set the weight before anything is coated.
02
Lamination
Molten LDPE is pressed onto both faces. That is the layer that stops water and carries the UV package.
03
Finishing
Cut to size, eyelets punched to your spacing, seams heat-sealed, and each roll labelled with weight, length and batch.
Five checks before the truck is loaded.
None of these are certificates. They are the measurements that decide whether a claim of 200 GSM is actually 200 GSM.
Grammage
Every roll is weighed and checked against the ordered GSM. Out-of-tolerance rolls stay in the plant.
Made width
Measured, not quoted off the machine plate. A 4.0 m sheet that arrives at 3.95 m ruins a panel plan.
Weld strength
Peel tests on the seam. The weld is the first place a cover leaks, so it is the first place we pull apart.
Eyelet spacing
Pitch and edge distance checked against the drawing, because a grommet set 20 mm off pulls out under wind.
Roll label
Weight, length, batch and specification on the label, matching the packing list on the container.
Four kinds of buyer, four different questions.
Importers & distributors
Mixed specifications in one container, and paperwork that has to match the label on every roll.
Brands & OEM
Your colour, your panel sizes, your print file, your label. The fabric is ours; the surface is yours.
Rental & event suppliers
Repeat sizes at short notice, and a specification sheet you can hand to a crew on site.
Converters & fabricators
Roll stock by the tonne, unprinted, cut to your width — for the sewing and finishing you keep in-house.
LET’S TALK ABOUT YOUR PROJECT
Send the surface. We will send the weight.
Tell us what the cover sits over, the span it has to cross and how it ties down. What comes back is a weight, a made width and a seam plan — in writing, with the tolerance stated.
Leading PE tarpaulin factory in China. Specialized in manufacturing high-quality polyethylene tarpaulins.