PE 200 GSM Silver/Silver Tarpaulin 20×30 ft
The general-purpose cover. 200 GSM is the weight most yards settle on: heavy enough to hold tension on a trailer or a stack, light enough for one person to handle a 20 x 30.
- Material
- PE
- Weight
- 200 GSM
Heavy duty is a weight, not a promise. In this range it starts at 200 GSM and runs to 300 GSM in PE, or from 475 GSM in coated PVC - the point where a cover stops being a weather sheet and becomes something you can walk on, drag across a load and tie down without treating it gently. Below that a cover still works; it just does not survive being used.

The general-purpose cover. 200 GSM is the weight most yards settle on: heavy enough to hold tension on a trailer or a stack, light enough for one person to handle a 20 x 30.
A mill roll for anyone cutting their own sizes: converters, distributors, or a yard that makes up covers as loads arrive. 4.0 m is the widest single PE drop we make.
A roofing sheet with a reinforced hem, because a roof cover fails at the edge long before it fails in the middle. Silver face out, yellow face down so a lap is visible from above.
The top of the PE range. Used where a cover is dragged, walked on or left out for more than one season - demolition debris, long-term stockpiles, heavy machinery.
200 GSM is the working weight for most sites. It holds tension on a trailer, lies flat on a stockpile and is still light enough for one person to pull over a 20 by 30 ft load. Most of what leaves the plant sits here.
250 GSM is where a cover starts to be handled badly without paying for it: dragged over rubble, folded wet, stacked under other covers. It is the weight to specify when the same sheet has to come back for a second and third job.
300 GSM is the top of the PE range. There is no heavier PE we make, so if a job needs more than this, the answer is PVC rather than a thicker weave. At 300 GSM the sheet stops being something one person throws; it becomes something two people lay.
Not in the middle of the sheet. It fails at the corner ring, at the first ring down the long edge, and along the hem where the rope runs – the three places where load concentrates and where a cheap fixing costs the whole cover. Everything in this range is welded rather than stitched, eyeleted through a reinforcement patch, and hemmed so the edge carries load along its length instead of at one point.
The other failure is weight that does not match the use. A 90 GSM sheet over a debris pile is not a lighter version of a heavy cover; it is a different product that will tear from the corner inward within a month.
Both are in this range and they are not interchangeable. PE is lighter per square metre, welds cleanly, and is the right answer for dry loads and covers handled by one or two people. PVC is heavier, takes abrasion and constant flexing better, and is the material to specify when the cover is in daily use, sees salt water, or has to last several seasons on the same frame.
In our range 200 GSM and above. Below 200 GSM a PE cover is a light or medium sheet: useful, but not built to be walked on, dragged or left out for a season. 200-300 GSM PE and 475-745 GSM PVC are what we sell as heavy duty.
PVC, from 475 GSM up. It costs more per square metre and takes longer to schedule, but it handles daily handling, abrasion and constant flexing better than any PE we make. PE is the right choice where the cover is laid and left, or handled by one person.
Not in PE - the line is built to 4.0 m and that is the widest single piece. PVC goes to 5.0 m. Anything wider is welded from drops, and the plan for where those seams land matters more than the number of them.
Not as standard. Our PE and PVC ranges are supplied without a certified flame-retardant treatment, and we will not describe them as meeting a standard we have not tested to. If your site requires documented fire performance, name the standard before quoting and we will confirm what can be met.
It depends far more on handling than on the number on the label. A 300 GSM sheet folded wet and stored in a heap will fail at the fold lines before a 200 GSM sheet that is dried and stored flat. UV stabiliser is in the formulation, not on the surface, so a cover stored properly can come back for several seasons.
Five tonnes per specification, with sizes within a specification mixed to reach it. PE standard runs ship in about 30 days for a container; PVC runs are scheduled separately and take around 45 days.