PVC 18 oz Black Lumber Tarp 24×27 ft
The North American lumber tarp size. 24 x 27 with an 8 x 8 drop covers a standard flatbed load with the ends hanging past the stake pockets.
- Material
- PVC
- Weight
- 18 oz / 610 GSM
The PVC reference sheet. Heavier than any PE we make, weldable on site, and the material to specify when a cover is handled daily or has to last several years.
| Construction | 18 oz coated PVC, heat-welded seams, rope-reinforced hem |
|---|---|
| Eyelets | Brass rings set through reinforced patches |
| Seams | Heat-welded. No sewn seams are offered on this range. |
| Minimum order | 5 tonnes per specification, sizes within a specification may be mixed |
The PVC reference sheet. Heavier than any PE we make, weldable on site, and the material to specify when a cover is handled daily or has to last several years.
Cut, welded, hemmed and eyeleted in the same plant, so the size that ships is the size that was agreed. PVC is coated from 475 to 745 GSM; this sheet sits at 18 oz / 610 GSM.
Typical use: General heavy cover, stockpile, plant. If the job calls for something outside these figures, send the requirement and we will say whether it is a fit rather than quote around it.
Yes. The size and the GSM are separate decisions: tell us the covered size and the job, and we will confirm which weight holds up in it. A change of weight starts a new specification for minimum-order purposes.
A swatch of the actual laminate is free of charge with freight at your end. Production follows the approved swatch, so colour and hand are agreed before the run rather than after.
The North American lumber tarp size. 24 x 27 with an 8 x 8 drop covers a standard flatbed load with the ends hanging past the stake pockets.