PE 150 GSM White Floor Cover 10×20 ft
The one-person floor cover: 10 by 20 ft at 150 GSM weighs under 3 kg, so it goes down, comes up and goes in a van without a second pair of hands.
- Material
- PE
- Weight
- 150 GSM
Black at 250 GSM for the floor that is outdoors: event ground, gravel, decking and temporary walkways, where a white sheet is a grey sheet by lunchtime.
| Construction | 250 GSM, cut from two 4.0 m panels and a 1.14 m panel — 2 welds run the length of the sheet |
|---|---|
| Edge | Welded hem, brass eyelets at 3 ft centres, reinforced hem on request |
| Seams | Heat-welded overlap, flat. No sewn seams, no pockets and no drawstring channel. |
| Cover weight | About 34.8 kg for the finished cover (139.3 m² at 250 GSM) |
| Minimum order | 5 tonnes per specification, sizes within a specification may be mixed |
Outdoor floors are a different problem from indoor ones: the cover is walked on in boots, it gets wet, and it is seen from a distance. Black hides the mud that white shows, and the 250 GSM weight keeps the sheet from lifting at the edges when air gets under it. Two welds, both running the 50 ft length.
This is a floor cover, not a ground barrier against roots or sharp stone. On gravel or rough hardstanding, put a geotextile down first — a 250 GSM laminate will be punctured by a single flint under a boot heel, and a puncture in a floor cover spreads.
Yes — every cover on this page is a cutting size, not a fixed one. Send the floor dimensions and say whether the cover has to finish at the wall or stop short of it, and the cut follows. A change of size starts a new specification for minimum-order purposes.
A swatch of the actual fabric is free of charge with freight at your end. For a floor cover the swatch matters more than usual: colour, surface texture and how the sheet behaves when unrolled are all things a photograph will not tell you.
The one-person floor cover: 10 by 20 ft at 150 GSM weighs under 3 kg, so it goes down, comes up and goes in a van without a second pair of hands.
The general floor sheet: 20 by 40 ft, one weld, 18.6 kg. Covered halls, workshops and event floors where a 10 ft sheet is two sheets short.
A volleyball court is 30 by 60 ft, so this cover sits inside the lines. PVC at 610 GSM (18 oz), one weld, 102 kg on a roller.