Opens in a new tab
ROC Tarp HomepageGet a Quote

Floor Tarps & Gym Floor Coverings

A floor tarp is the least glamorous sheet we cut and the one with the most riding on it: a lacquered sports floor, a polished concrete slab, a marquee that has to stand on wet grass. Two things decide which cover you need, and neither is the product name. The first is mass per square metre, because that is what stands up to being walked on. The second is how the finished cover will be moved, because a 50 by 84 ft cover in 18 oz vinyl weighs 238 kg and nobody carries that. We cut PE floor sheets from 150 to 300 GSM and PVC from 475 to 745 GSM, and we will tell you which one the job actually needs.

Stock floor covers by size, weight and material

PE 150 GSM White Floor Cover 10×20 ft

The one-person floor cover: 10 by 20 ft at 150 GSM weighs under 3 kg, so it goes down, comes up and goes in a van without a second pair of hands.

Material
PE
Weight
150 GSM
View product

PE 250 GSM White Floor Tarp 20×40 ft

The general floor sheet: 20 by 40 ft, one weld, 18.6 kg. Covered halls, workshops and event floors where a 10 ft sheet is two sheets short.

Material
PE
Weight
250 GSM
View product

PE 250 GSM Black Outdoor Floor Tarp 30×50 ft

Black at 250 GSM for the floor that is outdoors: event ground, gravel, decking and temporary walkways, where a white sheet is a grey sheet by lunchtime.

Material
PE
Weight
250 GSM
View product

PVC 610 GSM Grey Gym Floor Cover 30×60 ft

A volleyball court is 30 by 60 ft, so this cover sits inside the lines. PVC at 610 GSM (18 oz), one weld, 102 kg on a roller.

Material
PVC
Weight
610 GSM (18 oz)
View product

PVC 610 GSM White Gym Floor Cover 50×84 ft

A high-school basketball court is 50 by 84 ft. This is that cover: 18 oz PVC, 238 kg, four welds, and a handling plan before it is a purchase.

Material
PVC
Weight
610 GSM (18 oz)
View product
Buying guide

A floor cover is a weight per square metre and a handling plan — the rest is arithmetic

Search for a floor tarp and the results split into two markets that barely talk to each other. One is a gym floor covering: a coated vinyl sheet, cut to the court, laid by two people and wheeled away on a cart. The other is a floor sheet you throw down over concrete, gravel or a carpet you are painting around. They share a search term and almost nothing else — not the fabric, not the weight, not the way the edge is finished. This page separates them, because buying the wrong one is not a matter of taste: an 18 oz vinyl cover is wasted on a building site, and a 150 GSM poly sheet on a maple court is a scratch waiting to happen.

1. A floor tarp is bought for one of three reasons

To protect a floor that must not be marked. Sports halls, studios, showrooms, lobbies. The cover goes down before chairs, tables, staging or a graduation ceremony, and comes up afterwards. Here the floor is the asset, the cover is disposable by comparison, and the two things that matter are what the underside does and how flat the sheet lies.

To make a floor where there is not one. An outdoor floor tarp over grass, gravel or mud: a wedding marquee, a site compound, a temporary walkway. Here the cover is not protecting anything, it is the surface — so it has to take boots, stand up to wind lifting the edges, and be heavy enough not to ripple underfoot.

To cover a floor while work happens. Renovation, painting, plastering, scaffolding, furniture moves. This is the volume use and the cheapest: a 150 or 250 GSM PE sheet, cut to a size one person can handle, replaced when it is too far gone to fold.

The vocabulary is just as split. What a supplier calls a floor tarpaulin is usually the cheap PE sheet; what a school district buys under gym floor covering is a coated vinyl with a specified weight in ounces; and ground sheet tends to mean the layer under a tent or a pool. Same three jobs, three different fabrics. If you are unsure which one you are being quoted for, the giveaway is the unit: ounces per square yard means a coated vinyl, GSM alone usually means polyethylene.

2. Six stock floor covers, and what each one weighs

Every cover below is a cutting size rather than a fixed one, but these six are the sizes we are asked for often enough to keep as patterns. The last two columns are the ones buyers never get from a catalogue and always ask for on the phone: how the sheet is assembled, and what the finished cover weighs.

Size Weight Colour Panels / welds Cover weight What it typically covers
10 x 20 ft
3.05 x 6.10 m
PE 150 GSM White One 4.0 m panel, no weld 2.8 kg Renovation, painting, furniture moves, van floors — the size one person actually uses
20 x 40 ft
6.10 x 12.19 m
PE 250 GSM White 4.0 m + 2.1 m, one weld 18.6 kg Hall and workshop floors, event staging, marquee sub-floor
30 x 50 ft
9.14 x 15.24 m
PE 250 GSM Black 2 x 4.0 m + 1.14 m, two welds 34.8 kg Outdoor event flooring, temporary walkways, deck and gravel cover
30 x 60 ft
9.14 x 18.29 m
PVC 610
(18 oz)
Grey 5.0 m + 4.14 m, one weld 102 kg A volleyball court — 18 x 9 m sits inside the lines — and multi-use halls
50 x 84 ft
15.24 x 25.60 m
PVC 610
(18 oz)
White Five 3.2 m panels, four welds 238 kg A high-school basketball court, graduation and exam cover
50 x 70 ft
15.24 x 21.34 m
PVC 745
(22 oz)
Black Five 3.2 m panels, four welds 242 kg Colour guard and winter guard floors, stage and rehearsal floors

The weight is simply area times GSM, and we publish it because it is the number that decides whether a cover gets used. A 2.8 kg sheet comes out of the van on a wet Monday; a 238 kg sheet needs a cart, a ramp and three people who have been shown how to roll it. Buyers who choose on price and size alone discover this on delivery day, which is the worst possible time.

It also explains an oddity in the range. The two heaviest covers here are only slightly larger in area than the 30 by 60, but more than twice the weight — because the weight per square metre nearly doubles when you move from 250 GSM polyethylene to 610 GSM vinyl, and because 50 ft across cannot be cut from one panel.

3. Gym floor coverings: the weight ladder, and where we sit on it

Gym floor coverings are their own trade, and it is worth knowing its units before you compare quotes. The product is a PVC-coated scrim — a woven polyester base with vinyl on both faces — sold by weight in ounces per square yard, and the ladder runs from a light 10 oz up to 32 oz. Ours runs 475 to 745 GSM, which is 14 to 22 oz: the middle of that ladder, and the part most school and municipal work specifies.

Weight In GSM Where the trade uses it Do we make it
10 oz 339 GSM Light protective covers, short events, throw-down sheets No — below the bottom of our PVC range
14 oz 475 GSM Light gym and hall cover, storage covers, staging drapes Yes — bottom of the PVC range
18 oz 610 GSM The gym floor workhorse: courts, exam halls, assemblies, trade shows Yes — our stock gym weight
22 oz 745 GSM Performance floors, heavy traffic, covers that must lie dead flat Yes — top of the PVC range
27 oz 915 GSM Heavy-duty arena and touring covers No — above our range, we would quote it as a custom item
32 oz 1,085 GSM The heaviest touring and arena covers No — above our range

Two things on that table are worth saying plainly, because they decide whether we are the right supplier for your job.

We do not laminate a backing. A good part of the gym floor market — the part that covers lacquered maple — is felt-backed or foam-backed vinyl, and the backing is the whole point: it is soft enough not to abrade the finish, and thick enough to swallow grit. We coat, cut and weld sheet; we do not laminate a non-woven or a foam to it. If your specification says felt-backed, we are not the supplier, and we would rather say so before you send a drawing.

We do cut to the court and weld it flat. What we are good at is the cutting list: a cover that finishes where the run-off ends, squared corners, a hem that does not curl, and welds that lie flat enough to walk over without feeling them. If the venue supplies or already owns a soft underlayer, the vinyl sheet on top of it is exactly the product we make.

4. Gym floor tarps, and the grit underneath

Almost every damaged floor we hear about was not damaged by the cover. It was damaged by what the cover carried in: a grain of sand under a boot, a chip of gravel from the car park, a screw that fell out of a table leg. Once that grit is under a sheet weighing a hundred kilos and a person walks across it, the grit has nowhere to go and the floor finish takes the pattern of it.

So the procedure matters more than the fabric. Sweep and then mop the floor before the cover goes down, not after. Store the cover rolled, off the floor, never folded on a dirty pallet. Roll it out rather than dragging it, because dragging a 610 GSM sheet across a court is a very effective way of collecting every particle in the room under it. And when a gym floor tarp is used repeatedly, treat the underside as the wear face: it is the side that has to stay clean, which means the cover needs a clean place to be rolled up, and that is usually the missing piece.

Two details that come up on every gym job:

No eyelets unless you ask. On a floor cover, a brass ring is a scratch waiting to happen and a trip hazard on a smooth surface. Nothing indoors needs lashing down, so we hem these covers flat and leave the rings off. Outdoors it is the opposite — an outdoor floor tarp needs rings at 3 ft centres because the wind will get under the edge and lift it.

Fresh floor finishes need a test. Long contact between a plasticised vinyl and a newly applied floor finish is one of those combinations that is fine for years and then is not. If the floor was refinished in the last season, put an offcut down for a fortnight in a corner before covering four thousand square feet. It costs nothing and settles the question.

5. Colour guard floor tarps and performance floors

There is one floor cover with a requirement none of the others have: it has to disappear. On a performance floor — what the US circuit calls color guard floor tarps, and what the rest of the world files under winter guard or indoor guard floors — nobody should be thinking about the sheet while a flag is in the air. That means no ridge along a weld, no eyelets at the edge, no ripple that catches a bare foot on a spin turn, and a surface that reads as one continuous floor from the stands.

The weight does most of that work. At 745 GSM (22 oz) the sheet lies down under its own mass and does not need taping at the edges to stay put, which matters because tape lines are the first thing a performer catches a toe on. The cover is built flat: panels welded with an overlap that is fused rather than raised, hemmed flat, corners squared. At 50 by 70 ft it weighs about 242 kg, so it lives on a core and moves on a cart — which is also why the size, the storage and the transport are one decision rather than three.

On colour: black is the default because it swallows the gym behind it and hides scuffs from equipment, and it shows every piece of floor debris, which is a useful property when a team is sweeping a floor at ten at night. Print is a different matter — a printed backdrop or floor graphic is handled as a separate printing process, with its own minimum quantity and its own lead time, and it is scheduled alongside the welding run rather than inside it.

6. The width you order decides the waste

Fifty feet is 15.24 m, and no roll width divides into it. That single fact decides how a large floor cover is built, and it is the part of a quotation buyers cannot see. Two builds give the same finished cover:

How the 50 ft width is built Welds Offcut What it does to the cover
Five 3.2 m panels 4 About 16 m² on a 70 ft length More seams to walk over, less cloth bought and thrown away
Three 5.0 m panels plus a 0.24 m strip 3 About 102 m² on a 70 ft length One fewer seam, and a narrow strip that exists only to reach 15.24 m

We build the first way on a floor cover, and the reason is not thrift. A narrow strip welded along one edge of a performance floor is a stiff line exactly where a performer’s foot travels along the edge, and the offcut is a real cost that shows up in the price either way. On a cover where flatness matters less — a 30 by 60 gym sheet, a construction sheet — one long weld is the better trade: a 5.0 m and a 4.14 m panel leaves 0.86 m of width on the roll, about 16 m², and gives a single seam running the length of the hall.

7. Seams, hems and the edge

Every cover on this page is heat-welded. There is no thread in it: no sewn hem, no stitched lap, no pocket, no drawstring channel. That is not a limitation we are working around — a welded overlap is flatter than a sewn one, it does not wick water along the stitch line, and there is no thread to rot or fray where a cover is dragged across a floor.

Edge How it is made When to choose it What it costs you
Plain cut Cut and squared, no hem Linings and templates trimmed on site The edge frays with handling — a cutting allowance, not a finished cover
Welded flat hem Folded and fused, about 50 mm Indoor covers, gym and performance floors Nothing underfoot; one hem line to keep straight when rolling
Hem with eyelets at 3 ft Flat hem, brass rings on 914 mm centres Outdoor floors, walkways, anywhere the wind reaches Rings on a smooth floor are a trip and a scratch
Reinforced hem, eyelets at 12 in Two-ply hem, rings on 305 mm centres Covers lashed down and lifted repeatedly About double the hardware, the punching and the edge weight

If the cover has to do both jobs — laid indoors on a court in winter, pegged out on grass in summer — say so. The answer is usually a flat hem indoors with rings on a separate outdoor sheet, because one cover that tries to be both ends up with rings on a sports floor and a hem that cannot take a rope.

8. What to send with the enquiry

Six things settle a floor cover quote: the finished size you want, what the floor is made of, whether the cover finishes at the wall or stops short of it, one piece or two, the material or GSM if you have a preference, and the quantity. Add the destination port.

If it is a gym or a hall, the useful extra is the layout: a sketch of the room with the run-off marked costs you two minutes and saves a re-cut, because the playing area and the room are rarely the same rectangle. If the venue has a specification with a weight in ounces, send that instead of converting it — we would rather quote 18 oz from your document than from our arithmetic.

Minimum order is 5 tonnes per specification, and sizes within one specification can be mixed, so a mixed order of 30 by 60 and 50 by 84 does not each need its own five tonnes. PE runs about 30 days from an approved sample, PVC about 45 days. Fabric samples are free and you cover the courier.

What we do not do: felt or foam backing, sewn hems and pockets, installation or laying crews, and retail single pieces. Nor will we put a flame-spread rating on a page we have not tested to — if your venue asks for a certificate, tell us which standard it names and we will give you a straight answer rather than a number. The full size list across every format is on the sizes and specifications page; the fabrication steps are on the cutting and heat sealing and eyelet and reinforced hem pages.

Two pages worth reading next, because they are the two places a floor enquiry usually belongs instead of here. An under-pool sheet, or the ground cloth beneath an above-ground pool, is on the pool and pond range — it is a different job and a different weight. And if what you need is a long run of ground cover rather than a cut cover, that is a roll, on the garden and landscape page. Buyers who want coated fabric by the metre rather than finished covers should start from the PVC range.

FAQ

Frequently asked questions

What is the difference between a floor tarp and a gym floor covering?

Weight and material. A floor tarp is usually a polyethylene sheet at 150 to 300 GSM, bought to protect a floor or make a temporary one. A gym floor covering is a PVC-coated scrim sold by weight in ounces — 10 to 32 oz — with 18 oz, which is 610 GSM, the workhorse. Ours runs 475 to 745 GSM, so 14 to 22 oz.

Can you make a cover for a full basketball court in one piece?

Yes. A high-school court is 50 by 84 ft, and in 18 oz vinyl that cover weighs about 238 kg. We can build it as one piece, but for most buyers we quote two pieces that overlap at the centre line: each half is under 120 kg, two people can move it, and the overlap takes the wear where a seam would.

Do you laminate a felt or foam backing?

No. We coat, cut and weld sheet, and a non-woven or foam backing is a separate lamination we do not do. If your specification calls for felt-backed vinyl over a lacquered floor, we are not the supplier for that job and would rather tell you before you send a drawing.

Will a poly tarp damage a gym floor?

The tarp itself will not. What it carries in will. A grain of grit under a sheet that people walk on turns into a scratch pattern on the finish, and a 150 GSM sheet on a polished court will also slide. Polyethylene is the right answer for renovation, workshops and outdoor ground, not for a lacquered sports floor.

Should I choose 18 oz or 22 oz?

Eighteen ounce (610 GSM) is the gym standard: courts, exam halls, assemblies, trade shows. Go to 22 oz (745 GSM) when the cover has to lie dead flat without taping, when traffic is constant, or when it is a performance floor where a ripple or a weld ridge would be felt. Above 22 oz is outside our range.

Can you print a colour guard floor?

Print is handled as a separate printing process, with its own minimum quantity and lead time, scheduled alongside the welding run rather than inside it. Send the artwork and the finished size and we will quote the two steps separately so you can see which one is driving the cost.

Do you supply a flame-retardant certificate?

Only where we have tested to the standard your venue names. Tell us which one it is — the requests that come up are NFPA 701, EN 13501-1 and CPAI-84 — and we will answer for that standard. We will not put a rating on a page or a quotation that we have not tested to.

What is the minimum order and lead time?

Five tonnes per specification, and sizes within one specification can be mixed. PE runs about 30 days from an approved sample, PVC about 45 days. Fabric samples are free of charge with freight at your end.

Floor Tarps & Gym Floor Coverings

Request a quotation

Leading PE tarpaulin factory in China. Specialized in manufacturing high-quality polyethylene tarpaulins.

  • what'sapp: +86 18561818308marketing@roctarpstarp.com
  • Get an instant quote