PE 150 GSM White Floor Cover 10×20 ft
The one-person floor cover: 10 by 20 ft at 150 GSM weighs under 3 kg, so it goes down, comes up and goes in a van without a second pair of hands.
- Material
- PE
- Weight
- 150 GSM
The colour guard and winter guard floor: 22 oz PVC, 50 by 70 ft, black, welded flat so nothing catches a flag or a bare foot.
| Construction | 745 GSM (22 oz), cut from five 3.2 m panels — 4 welds run the length of the sheet |
|---|---|
| Edge | Welded flat hem, no eyelets, squared corners |
| Seams | Heat-welded overlap, flat. No sewn seams, no pockets and no drawstring channel. |
| Cover weight | About 242 kg for the finished cover (325.2 m² at 745 GSM) |
| Minimum order | 5 tonnes per specification, sizes within a specification may be mixed |
A performance floor has one requirement that a protective cover does not: it has to disappear. Nobody should think about the floor while a flag is in the air, so the sheet has to lie dead flat, take a spin turn without grabbing, and show no ridge where two panels meet. At 745 GSM (22 oz) the weight itself does most of that work — the cover does not need taping at the edges to stay put.
The welds are heat-welded flat, not lapped and stitched, so there is no thread to fray and no ridge to trip on. Print is handled as a separate printing process with its own minimum and lead time, not as part of the welding run. We do not sew a hem or a pocket into this floor.
Yes — every cover on this page is a cutting size, not a fixed one. Send the floor dimensions and say whether the cover has to finish at the wall or stop short of it, and the cut follows. A change of size starts a new specification for minimum-order purposes.
A swatch of the actual fabric is free of charge with freight at your end. For a floor cover the swatch matters more than usual: colour, surface texture and how the sheet behaves when unrolled are all things a photograph will not tell you.
The one-person floor cover: 10 by 20 ft at 150 GSM weighs under 3 kg, so it goes down, comes up and goes in a van without a second pair of hands.
The general floor sheet: 20 by 40 ft, one weld, 18.6 kg. Covered halls, workshops and event floors where a 10 ft sheet is two sheets short.
Black at 250 GSM for the floor that is outdoors: event ground, gravel, decking and temporary walkways, where a white sheet is a grey sheet by lunchtime.