The word “marine tarp” hides three different transactions, and treating them as one is how a quotation goes wrong. A boat owner looking for a winter cover is a retail buyer. A workshop sewing boat and yacht covers wants fabric on a roll. A ship manager asking about hatch tarpaulins wants a weatherproofing layer that has to satisfy survey. We serve the second and the third. This page keeps those two supply routes separate, and says plainly what we do not make.
1. Three buyers, two supply routes
A cover maker — a workshop producing boat, yacht, sail or pontoon covers — buys PVC-coated polyester on a roll, cuts and welds it into finished covers. That is the bulk of the marine market we serve: we are the fabric supplier, not the cover brand. A ship or terminal operator buying a hatch tarpaulin wants a fabricated sheet that weatherproofs a pontoon hatch cover and has to stand up to survey. A private boat owner wants one cover for one boat, bought retail and shipped individually — a single piece, not a production order, and below our five-tonne minimum.
| Buyer |
Wants |
Our role |
Boundary |
| Cover maker / OEM |
PVC fabric on a roll, consistent GSM and surface |
Fabric supplier |
We do not brand or retail the finished cover |
| Ship / terminal operator |
Hatch tarpaulin to a drawing, to survey standard |
Fabricator of the tarpaulin |
Not the steel hatch cover itself |
| Private boat owner |
One retail cover, one shipment |
Not supplied |
Below the five-tonne minimum |
That third buyer carries the largest search volume and is the least relevant to us. “Boat tarps” is searched mostly by owners covering a boat for the winter. We do not chase that volume; when those searchers arrive we point them at what we actually supply, and the cover workshops they eventually find are the customers we want.
2. Hatch tarpaulins: a weatherproofing layer, not the hatch cover
There is a sharp distinction inside “hatch cover” that decides everything. The primary hatch cover on a cargo ship is a steel structure — folding, side-rolling or pontoon panels of marine steel, with hydraulic or cleat operation and rubber gaskets. It is part of the vessel, designed and surveyed under the Load Line Convention, SOLAS and the IACS rules. We do not make it.
The tarpaulin enters on a pontoon hatch cover, the crane-lifted steel panels common on older tonnage. There a tarpaulin is laid over the panels as a secondary weatherproofing layer, held by battens and wedges, and it is a required part of the closure: a failed tarpaulin is treated as a hatch-cover failure for cargo-claim purposes, whatever the steel underneath is doing. That tarpaulin — not the steel lid — is the product this page supplies.
We fabricate it to the hatch drawing: the panel dimensions, the batten and wedge positions, reinforcement at corners and lashing points, and the eyelets or ties that hold it. Weathertightness of the assembled cover remains a survey matter — the class society and the P&I inspector decide whether the closure is sound. Our job is to deliver a tarpaulin that matches the drawing and the material specification, not to issue a class certificate we have not earned.
3. What “marine grade” actually specifies
For cover workshops, the product is PVC-coated polyester, and “marine grade” is shorthand that still has to be filled in. The choices that matter are the base-cloth denier, the coating weight in GSM, the surface finish, and the additives that decide how the sheet behaves outdoors at sea — UV stabilisation, mildew resistance and low-temperature flexibility.
Salt and sun are the two things a boat cover meets every day, so a cover maker specifies against exposure, not against the word “marine”. Our PVC range runs 475–745 GSM in 3.2, 4.0 and 5.0 m. A light storage cover sits low in that range; a cover that faces heavy handling, repeated folding and a full winter goes higher, with a reinforced grade and a lacquered or anti-scratch surface where the finish matters.
| Fabric |
Widths |
Use direction |
Note |
| PVC-coated polyester 475–610 GSM |
3.2 / 4.0 / 5.0 m |
Light boat and storage covers |
Balance of weight and handling |
| PVC-coated polyester 610–745 GSM |
3.2 / 4.0 / 5.0 m |
Yacht covers, hatch tarpaulins, deck work |
Reinforced grade for rough use |
| Laminated PE 50–300 GSM |
2.0 / 4.0 m |
Temporary and static protection |
Not a substitute for marine PVC duty |
One number worth carrying into a quotation: our black 22 oz deck and hatch cover in 30 × 40 ft is 111.5 m² at 745 GSM, so the piece weighs about 83 kg. That is a two-person lift and it is why a deck tarpaulin is dragged or craned into place rather than carried. Five tonnes of that sheet is roughly 60 pieces — this is a fleet or a distributor order, not a refit.
4. Salt, sun and folding: how a boat cover actually fails
A PVC coating is impermeable, so water does not pass through the sheet. It gets in at four places, and knowing them is most of what a cover maker needs from a fabric supplier.
The seam. Heat-welded seams are strong and watertight when they are made right; a cold weld or a contaminated surface leaves a line that opens in service. We weld, and we do not offer sewn seams on this range, because a needle makes a row of holes that salt water wicks through.
The cut edge. A raw edge on a woven base cloth is a wick: water travels along the yarn into the laminate. That is why the perimeter of a marine sheet is folded and welded, not cut and left.
The eyelet. A brass ring set through a single thickness will pull out under a flapping cover long before the cloth fails. Rings set through reinforced patches, on a doubled hem, are the difference between a cover that lasts two winters and one that lasts six.
The fold. This is the one nobody specifies. A cover that is folded along the same line every season cracks there, because PVC plasticiser migrates at a crease and the coating embrittles. A cover maker who knows this stores covers rolled or folded on a different line each time — and buys a grade with enough low-temperature flexibility that a winter fold does not fracture.
| Failure |
Cause |
What changes in the specification |
| Seam opens |
Cold or contaminated weld |
Heat-welded seam, no sewn seams; weld tested on the sample |
| Water tracks along an edge |
Raw cut edge wicking through the weave |
Folded and welded hem on every perimeter |
| Eyelet tears out |
Ring through single thickness, flapping load |
Brass rings through reinforced patches on a doubled edge |
| Crack along a fold line |
Plasticiser migration at a repeated crease |
Higher low-temperature flexibility; store rolled, not folded on the same line |
| Surface goes chalky |
UV attack on the coating |
UV-stabilised grade; lacquered topcoat where the finish matters |
5. Pontoon, sail and fishing covers: a width and a GSM, not a finished shape
A pontoon cover, a sailboat cover and a fishing-boat cover are different patterns cut from the same fabric. The cover maker cuts each to the boat’s profile, so what we supply is a width and a GSM that feeds a pattern, not a finished cover. What the workshop needs from us is a roll it can cut with consistent coating, colour and adhesion across the whole batch — repeatability is what saves waste and rejects, and it is the reason a cover maker changes supplier less often than it changes designs.
Panel count follows from the width, and it is worth doing the arithmetic before ordering. At 3.2 m a 30 ft (9.1 m) span is three panels and two seams; a 40 ft (12.2 m) span is four panels and three seams. At 4.0 m the same 30 ft span is still three panels, with more trim waste. On a shaped cover the seams have to land where the pattern allows, so the width decision is usually made by the cover maker, not by us — but the seam count is what the quotation turns on.
For a made-to-drawing cover or a shaped panel that stops being a rectangle, the work belongs on the custom route. A boat cover with a shaped bow, mast reliefs, zips or sewn seams is fabrication beyond a flat sheet, and it is quoted as a drawing-led job rather than a fabric roll.
6. What “how to cover a boat with a tarp” tells us — and what we do not do
A large share of the marine search volume is owners asking how to cover their own boat for winter, how to support a tarp over a cockpit, or whether to shrink-wrap instead. Those are retail, single-boat, how-to questions. We do not sell that customer a single cover and we do not publish a DIY covering guide. When that searcher gets serious they either buy retail locally or go to a cover maker — and the cover maker buys fabric from us.
The same boundary applies to the products around the sheet. Boat tarp supports — the poles and frames that hold a cover up — are a hardware line we do not make; a cover maker or a chandler supplies those. Inflatable boat fabric is a specialised air-holding, high-GSM construction with its own coating and welding requirements, and it is not on our lines. Shrink wrap is a different material and a different process. And the steel hatch covers, hydraulic systems, battens and wedges belong to ship equipment and stay outside a fabric quotation.
7. What to send, what we supply, and what stays outside the quote
The useful first enquiry states the route. For fabric supply: the use (boat, yacht, sail or pontoon cover), the width, GSM, colour, surface finish and metres per roll. For a hatch tarpaulin: the hatch drawing with panel dimensions, batten and wedge positions, reinforcement and tie-down points, plus the material specification you have to meet. Those two sets of details produce two very different quotations, and mixing them produces a wrong price.
Minimum order is 5 tonnes per specification. Custom PVC runs about 45 days; standard PE about 30 days. Samples are free and you cover the courier — and for a cover maker, ask for a piece of the actual roll colour you are quoting, because “navy” ranges from near-black to a blue that fades to purple in two seasons.
For the material itself, the PVC tarpaulin guide covers the coating, the widths and the grade words. For deck cargo and container work the container cover range is the adjacent specification. Bulk orders are quoted through the wholesale page, and made-to-drawing work through the custom route.