There is no single HS code for a tarpaulin. The same factory can ship three products that all get called “tarpaulin” in the sales email, and those three can land in three different chapters of the tariff — with different duty rates, different documentation and, in some markets, different treatment under anti-dumping or origin rules.
What decides it is not the product name. It is two facts about the goods as shipped: whether the article is made up, and whether the textile is structural. Get those two right and the heading follows. For anyone buying in bulk, that is also the basis of the specification sheet that should travel with the wholesale order.
Two questions, asked in this order
1. Is it made up? A roll of coated fabric going to a fabricator is material. A cover that has been cut to size, hemmed, welded and fitted with eyelets, D-rings or a rope hem is a made-up article. Same polymer, different chapter.
2. Is the textile doing structural work? If a woven scrim carries the tensile load and the coating only keeps water out, the goods are a textile article. If the textile is completely embedded in plastic, or the plastic is visibly coated on both faces, the legal notes can push the same material into the plastics chapter.
Neither question is about being waterproof, being heavy, or being called “heavy duty”. Those are marketing attributes; customs classifies construction.
The headings that cover almost everything
| Heading | Covers | Typical product | What decides it |
|---|---|---|---|
| 6306.12 | Tarpaulins, awnings and sunblinds, of synthetic fibres | Woven PE cover, cut and hemmed with eyelets; PVC-coated polyester truck tarp | Made up, and the synthetic textile is the strength member |
| 6306.19 | Tarpaulins of other textile materials | Cotton canvas tarpaulin | Cellulosic fibre, not synthetic |
| 5903.10 | Textile fabric coated, covered or laminated with poly(vinyl chloride) | PVC-coated polyester in rolls, for further fabrication | Roll goods, coating visible on one face, textile not embedded |
| 3921.90 | Other plates, sheets, film of plastics, reinforced or combined with textile | PVC tarpaulin roll with the textile fully embedded or both faces visibly coated | Chapter 59 notes push the material into Chapter 39 |
| 3920.10 | Film and sheet of polymers of ethylene, not reinforced | Unreinforced PE film in rolls — no scrim at all | No textile component to classify |
| 3926.90 | Other articles of plastics | Made-up cover from unreinforced PE film | Plastic article, made up, no textile |
Why PE and PVC usually land in the same place — and when they do not
A woven PE tarpaulin is a high-density polyethylene scrim laminated with low-density polyethylene film. Both are synthetic polymers, the scrim is woven textile, and once the sheet is cut, hemmed and eyeleted it is a made-up tarpaulin of synthetic fibres: 6306.12. The fact that it is plastic does not move it to Chapter 39, because the textile is visible and structural.
PVC is where the arguments start. A PVC-coated polyester cover, finished, is also 6306.12. But the same fabric in roll form can be either 5903.10 or 3921.90, and the difference is a legal note rather than an opinion: if the textile is completely embedded in the plastic, or coated on both faces with plastic that is visible to the naked eye, the material is treated as a plastic sheet combined with textile and leaves Chapter 59.
That is not a technicality invented by brokers. Customs rulings in several markets have classified bulk PVC tarpaulin material under 3921 rather than 5903 on exactly this basis, and the outcome turned on how much plastic was visible and what share of the weight it held. If you import PVC in rolls, that question is worth settling before the first shipment rather than after it.
The comparison in our PE vs PVC guide explains why the two materials behave differently; this page is only about how each one is declared.
Cotton is the exception people forget
A canvas tarpaulin is not a synthetic-fibre article, so it does not belong in 6306.12 whatever the invoice says. It goes to 6306.19. We do not weave cotton canvas, but buyers who compare a canvas quote against a PE quote often find the two carry different duty treatment, and that gap is part of the landed cost. Our tarpaulin vs canvas comparison covers the material side of that decision.
The invoice description decides which one gets picked up
Two identical covers can be examined under different headings because of how they were described. “Plastic sheet” invites the plastics chapter. “PVC coated fabric” invites 5903. “Woven polyethylene tarpaulin, cut to size, hemmed, eyelets fitted” describes a made-up textile article and supports 6306.12.
This is not about finding favourable wording. It is about giving an officer the facts that match the goods, because a description that does not match the construction is what produces a reclassification, a delay and a back-duty assessment. The description should state:
- Construction: woven scrim plus coating, or unreinforced film.
- Polymer: polyethylene (HDPE scrim, LDPE coating) or PVC on polyester.
- Weight: total GSM, and the split between scrim and coating where known.
- Condition: roll goods, or made up — cut, hemmed, welded, eyelets or D-rings.
- End use, stated plainly: truck cover, silage cover, roof cover.
Rates, origin and the part no article can settle
Duty rates differ between these headings, sometimes by a wide margin, and they also change with origin, trade agreements and temporary measures. Any figure printed in a blog post will be wrong by the time a container ships, so we do not print them. What matters is that the heading is right, because the rate, the documentation and any additional measure all follow from it.
Two things we cannot do: we are not a customs broker, and we cannot give a binding classification. What we can do is supply the construction data that a broker needs, and point out where a formal ruling is worth the fee — a binding tariff information decision in the EU, or a ruling from the customs authority in the US, is cheap relative to a reclassification on a 20-tonne shipment.
What travels with our shipments
For each order we can provide the construction sheet: scrim count, tape width, coating weight, total GSM, whether the coating is on one face or both, and the finishing operations applied. That is the document a broker needs to reach a heading, and it is also the document that tells a buyer whether the goods are what the quotation described.
If you are comparing suppliers and one of them cannot state the scrim and coating weights separately, that is worth more attention than the price difference. It usually means one of two things: the construction is not controlled, or the coating is thinner than the total GSM suggests — and in both cases the classification is being guessed along with everything else.
In one line
Made up, synthetic textile structural: 6306.12. Made up, other fibre: 6306.19. Roll goods, PVC on textile with the textile still visible: 5903.10. Roll goods with the textile embedded or both faces coated: 3921.90. No textile at all: 3920.10 in rolls, 3926.90 made up.
Send the construction and the shipping form — roll or made up — and we will tell you which of those the goods point to, and what to put on the invoice so the description and the goods agree.


