Opens in a new tab
ROC Tarp HomepageGet a Quote

Emergency Roof Cover: Choosing a Tarp That Survives the Season

About 7 min read
Share

An emergency roof cover is bought in an afternoon and judged six months later, when the first real storm arrives or the adjuster finally climbs up. Everything that decides whether the sheet is still there was settled at purchase — and almost none of it is in the product title.

This page is about that purchase, not about installation. If you specify or stock roofing tarpaulins for storm response, the useful question is not “which tarp is strongest” but “how long does this one have to last, and what will end it first”. Those two answers set the weight, the UV package and the edge build.

The only decision that matters first: how long

Roof covers run on three timelines, and they need three different sheets. A 30-day cover is a temporary weather seal while a claim is processed. A one-season cover spans a winter, which means freeze-thaw, snow load and months of UV. A multi-year cover is a substitute roof on a building that will not be repaired soon, and it has to survive everything a roof survives.

Buying for the longest case is not the safe default. A 610 GSM sheet on a 30-day job costs three times what the job needs and takes two people to get onto a pitch. Buying for the shortest case is worse: a 6 mil cover left up through winter is a call-back.

What actually ends a roof tarp’s life

In order of how often we see it:

  • Edge flutter. The perimeter lifts, works against its fasteners, and tears out from the fixing line inwards. This is the dominant failure, and it is a fixing problem, not a fabric problem.
  • UV. Stabiliser is consumed over time, the sheet embrittles, and it then splits at a fold or a wrinkle rather than wearing through.
  • Abrasion and puncture at the ridge, the eave and anything the fabric touches — chimney edges, vent pipes, the ridge cap.
  • Ponding, on any low-slope area. Standing water adds load, stretches the sheet, opens the seam and then finds the fastener.

That order matters commercially. Most buyers ask about thickness, which is the third item. The first item costs nothing to fix at the specification stage and everything to fix afterwards: a sheet with a reinforced hem, closer fixing points and a patch at each corner will outlast a heavier sheet with a plain edge. The mechanics are the same as for any wind-facing cover, and the load arithmetic in our grommet and tie-down guide applies unchanged to a roof.

The Blue Roof baseline: 30 days is a board and nail

The most useful public benchmark comes from storm response rather than manufacturing. Operation Blue Roof, run by FEMA through the US Army Corps of Engineers after named storms, installs temporary roofs to a defined standard: fibre-reinforced polyethylene sheeting, 1×2 furring strips, a galvanised nail every 24 inches along each strip, and strips every 6 feet.

Read the ingredients rather than the programme. It is not a clever membrane; it is mid-weight reinforced PE held by a board and a nail pattern. It also fixes the design life honestly at about 30 days, and it explicitly does not cover flat or warranted membrane roofs. Two things follow for anyone specifying a cover: the fabric is the cheap part of the system, and the fixing pattern is what buys the time.

Weight, translated into exposure

Thickness is usually quoted in mil for these sheets, and 1 mil ≈ 24 GSM for polyethylene. That conversion is the only way to compare a retail “6 mil” against a mill quote in GSM.

Exposure Typical sheet Weight Edge build Reality check
30 days, storm response Reinforced PE, 6–8 mil 145–190 GSM Rope hem, eyelets, battens Works when fixed like Blue Roof, fails when tied at the corners only
One season, over winter Heavy PE, 10–12 mil 240–290 GSM Welded hem, eyelets on 24 in, patches at corners Survives UV and freeze-thaw if the perimeter is continuous
Multi-year, until reroof 18 oz PVC-coated polyester ≈610 GSM D-rings or webbing, heat-welded seams The only one of the three that is a substitute roof, and priced like it
High-wind zone, any duration As above, one class up +30–50 % Halved fixing spacing, corner patches Weight helps; spacing helps more

UV is a consumable, not a feature

Every polyethylene sheet has a UV stabiliser package, and it is finite. The sheet does not fail gradually: it holds its strength, then embrittles, then splits at a crease. In full sun on a dark roof deck, that can happen inside one summer on an unstabilised economy sheet.

This is why two 200 GSM covers from two suppliers can differ by a factor of three in service life, and why a mill quote should state the stabiliser loading rather than the word “UV resistant”. Our guide to UV resistance covers what the label actually guarantees — the short version is that accelerated weathering data is the only comparison that travels between suppliers.

Colour is a programme convention, not a grade

Blue is the colour of storm response because a government programme used blue, not because blue performs better. White and silver reflect heat and keep the deck cooler underneath; black absorbs it, which can help shed snow but makes the sheet hotter and accelerates UV ageing of the same polymer.

Where a cover is going onto a low-slope roof over a heated building, a light colour is worth specifying for the temperature alone. Where it is going over a stripped deck in winter, colour is irrelevant next to the fixing pattern.

What a roof tarp cannot do

It is not a roof. It has no structural capacity, no fire rating, no code standing and no warranty as a roofing assembly. It does not ventilate, so anything under it must be able to dry downwards or it will trap moisture. It cannot be laid over a flue, a ridge vent, a skylight curb or a plumbing boot — a blocked flue sends combustion gas back into the building, and a covered vent traps moisture where it cannot escape. And a tarp laid flat with no fall will pond, which is a load problem before it is a leak problem.

One adjacent product worth naming so it is not confused with this one: a leak diverter, a small sheet with a hose outlet that catches an active drip inside a building. That is a different item with a different construction, and we do not make it.

What we supply, and what we do not

We make the fabric: coated PE from 50 to 300 GSM with UV stabiliser, fibre-reinforced sheeting, and 18 oz PVC-coated polyester to the same drawings. We cut to size, weld the seams, and build the edge to your drawing — rope hem, eyelets at a spacing you set, patches where the fixing loads land. For distributors and roofers buying ahead of storm season, that is the part that turns a roll into a product.

What we do not do is install. There is no crew, no local service and no call-out. If a customer needs someone on the roof tonight, they need a contractor; we can supply the cover that contractor installs.

What to send

  • Exposure: 30 days, one season, or multi-year.
  • Roof type and pitch, and whether there is a ridge, a valley or a low-slope section.
  • Dimensions, with the overhang you want past the eave.
  • Fixing method that will actually be used — battens, eyelets, or both.
  • Colour, and whether the sheets are pre-cut to a standard size for stock.

Send those and we will quote the lightest sheet that meets the exposure, rather than the heaviest one that makes the quotation look serious. A cover that is over-specified for 30 days is a cover that two people cannot lift onto a pitch in the rain.

roctarp.com

Ready to start your project?

Bring your drawing and the requirements you want to review.

  • Drawing
  • Material
  • Quantity
Request a quote
PROJECT INQUIRY

Ready to start your project?

By submitting this form you agree to be contacted about your enquiry.

Leading PE tarpaulin factory in China. Specialized in manufacturing high-quality polyethylene tarpaulins.

  • what'sapp: +86 18561818308marketing@roctarpstarp.com
  • Get an instant quote