Opens in a new tab
ROC Tarp HomepageGet a Quote

Round Tarps & Circular Tarpaulins

A round tarp is a cutting job before it is a fabric. The disc is cut from a welded PE blank of the same diameter, hemmed the whole way round and eyeleted at a spacing you set — so the diameter, not the product name, is what decides the price. We hold six discs from 8 to 30 ft as stock patterns, cut anything from 6 to 40 ft to order in 150 to 300 GSM, and weld panels to reach diameters no single 4.0 m panel can cover. Buyers arrive here with a tank, a bale stack or a pool and a tape measure. That is the right order.

Stock round tarpaulins by diameter, weight and colour

PE 150 GSM White Round Tarpaulin 8 ft

The lightest disc we cut: a frost cover for nursery stock, a cap over a single bale, a cover one person can lift and fold alone.

Material
PE
Weight
150 GSM
View product

PE 250 GSM White Round Tarpaulin 20 ft

White at 250 GSM for tank and pond covers, where reflected light and the way the disc drapes over a rim decide the choice.

Material
PE
Weight
250 GSM
View product

PE 300 GSM Black Round Tarpaulin 30 ft

The heavy disc. Two welds, 300 GSM, for industrial tanks and stacks that see wind, handling and a crane rather than a pair of hands.

Material
PE
Weight
300 GSM
View product
Buying guide

A disc is a diameter, a blank and an edge — in that order

Search for a round tarp and every result is a diameter: 6 foot, 10 foot, 16 foot, 24 foot. That is not a keyword quirk, it is how the product works. A circular cover has one dimension that matters and everything else follows from it — the blank it is cut from, the number of welds across it, the length of hem, and how many eyelets you will be tying down. This page takes those in order, because getting the diameter wrong is the one mistake that cannot be fixed at the hemming stage.

1. Six stock discs, and the range behind them

The six diameters below are cut from patterns we hold, so they can be ordered without a new cutting plan. Everything between 6 and 40 ft is made to order on the same equipment; the only difference is that a non-stock diameter starts with a cutting plan rather than a pattern. Both routes end at the same place: a disc, hemmed, eyeleted and checked against the size on the order.

Diameter Weight Colour Blank it is cut from Welds What it typically covers
8 ft / 2.4 m 150 GSM White One 4.0 m panel 0 A single bale, a bin, nursery stock, a cover one person folds alone
12 ft / 3.7 m 200 GSM Silver / Silver One 4.0 m panel 0 A short bale stack, feed bins, small tanks, machinery
16 ft / 4.9 m 200 GSM Green 4.0 m and 2.0 m panel 1 A bale stack, a yard cover that stays visible all season
20 ft / 6.1 m 250 GSM White Two 4.0 m panels 1 Open water tanks, ponds, circular reservoirs
24 ft / 7.3 m 250 GSM Silver / Silver Two 4.0 m panels 1 Large open tanks, silage clamps, big stacks
30 ft / 9.1 m 300 GSM Black Two 4.0 m and a 2.0 m panel 2 Industrial tanks and stacks, exposed sites, crane handling

The weights follow the span rather than the price. A small disc can be 150 GSM because a short span does not sag far and a light cover is easier to handle; a 24 ft disc at 150 GSM will belly into whatever it covers and hold water in the middle. The same fabric at 250 GSM holds its shape over the same span. If your tank is 24 ft across and the last cover pooled water in the centre, the weight was the problem, not the diameter.

2. Why a round cover costs more than a square one of the same area

Two things make a disc more expensive than its area suggests, and neither is the cutting. The first is the blank. A 20 ft disc is cut from a 20 by 20 ft square, which is 1.27 times the area of the disc itself — about a fifth of the cloth leaves as offcut, because the four corners of the square fall outside the circle. That ratio is the same at every diameter; it is a property of circles, not of our workshop.

The second is the edge. A disc of diameter D has a circumference of πD and an area of πD²/4, so the hem it carries per square metre of cover is 4/D. Halve the diameter and you double the hem per square metre. A 8 ft disc carries 1.67 m of hem for every square metre of cover; a 30 ft disc carries 0.44 m. Hems and eyelets are the labour in a round cover, which is why a small disc costs more per square metre than a large one — the opposite of what buyers expect from sheet goods.

Diameter Circumference Eyelets at 24 in Eyelets at 12 in Hem per m² of cover
8 ft / 2.4 m 7.5 m 12 25 1.67 m
12 ft / 3.7 m 11.6 m 18 37 1.08 m
16 ft / 4.9 m 15.4 m 25 50 0.82 m
20 ft / 6.1 m 19.2 m 31 62 0.66 m
24 ft / 7.3 m 22.9 m 37 75 0.55 m
30 ft / 9.1 m 28.6 m 47 94 0.44 m
40 ft / 12.2 m 38.3 m 62 125 0.33 m

The eyelet count matters twice: once in the quote, and once on the site. A 40 ft disc at 24 in spacing carries 62 rings; at 12 in it carries 125, which is roughly double the hardware and double the punching. That is the single biggest lever you have on the price of a large disc short of changing the fabric — and it is the one buyers most often leave to the supplier.

3. The diameter decides how many welds cross the disc

PE runs in 2.0 m and 4.0 m widths. A disc of diameter D needs a blank at least D wide, so the available widths decide the panel layout: one 4.0 m panel covers anything up to 13 ft, a 4.0 m plus a 2.0 m panel reaches 19 ft, two 4.0 m panels reach 26 ft, and two 4.0 m plus a 2.0 m reaches 32 ft. Above that it is three panels and two welds, up to 39 ft.

Two consequences. First, the weld is straight across the disc, not radiating from the centre, because the circle is cut from a welded rectangular blank. That matters at the rim: a radial construction brings six or eight seams together at one point in the middle of the cover, and that point takes the whole lifting or wind load. A straight weld spreads the same load along a line. Second, the seam position is fixed by the panel widths, not chosen for looks — on a coloured disc a weld is visible, and we would rather tell you where it will fall than have you find it after delivery.

4. Measuring: over the dome, not across the base

The number to send is the diameter of the cover, not of the thing underneath. For a tank or a pool with a rim, the cover has to drape past the edge, so add the skirt on both sides: a tank 3.0 m across with a 250 mm skirt each side needs a 3.5 m disc. State the skirt as a number and it goes into the cut; leave it out and you get the diameter you asked for, which may be exactly the tank and nothing more.

A domed stack breaks that arithmetic, because a tape stretched across the base measures the plan and the cloth has to travel over the crown. Measure a bale stack along the path the cover will take — up one side, over the top, down the other — or give us the base diameter and the height and we will work the path with you. Getting this wrong is not a small error: a disc cut to the base diameter of a domed stack will not reach the ground on any side.

Wind is the other measurement. A disc is a sail with no corners to spill from, and the load goes into the eyelets and the hem in the same way it does on a flat sheet. The arithmetic is 0.613 × V² pascals for wind speed V in metres per second, multiplied by the area, as an upper bound: a 20 ft disc covers 29 m², so if the full pressure acted on it the load would be about 410 kg at 15 m/s and 1,140 kg at 25 m/s. On a horizontal cover the real figure is lower because air spills over the rim, but the arithmetic explains why the cover is rarely what fails first — the rings pull, or the hem tears between them. Closer spacing and a rope through the hem are the two changes that help, and both are cheaper at the order than after the storm.

5. What a round cover suits, and what it does not

The shape is efficient where the thing underneath is round, and awkward everywhere else. Put a disc on a square stack and the corners stay exposed while the sides hang in folds that collect water. That is not a flaw in the cover; it is the wrong shape for the job, and a rectangular cover from the cut sheet range will do it better for less cloth.

Cover job Diameter to order Weight Edge that suits it Wrong choice looks like
Round bale stack 16 to 20 ft 200 GSM 24 in eyelets, 200 mm skirt 150 GSM that flaps and tears at the rings
Single bale cap 8 ft 150 GSM Rope through the hem An oversize disc that fills with rain
Open water tank Tank plus skirt 250 GSM 12 in eyelets on exposed sites 150 GSM sagging into the water
Fish or aquaculture tank Tank plus skirt 250 GSM, white or black Closed disc, no centre hole A liner ordered as if it were a cover
Above-ground pool Pool plus skirt 200 to 250 GSM 12 in eyelets, perimeter rope A thin cover that is chalk by the second season
Silage clamp or circular stack 24 to 30 ft 250 to 300 GSM 24 in eyelets, weighted skirt A light disc lifted off by the first gale
Boat or machine 16 to 24 ft 200 to 250 GSM 24 in eyelets A flat sheet tied at four corners

One request we cannot meet: a drawstring round tarp. A drawstring needs a sewn channel with the cord inside it, and this range is heat-welded — we do not sew. The equivalent is a welded hem with eyelets and a rope run round it, which gathers the same way and holds better under load, because the cord is not trapped inside a channel that can split. If the product you need is genuinely a sewn bag, it is a cut-and-sew item and not something we supply.

6. Tank, pond and aquaculture covers

Some of the largest demand for round covers comes from aquaculture, and the same word covers two different products. A liner sits inside the tank: a welded cylinder plus a base, with the weld in the wet zone and the whole assembly checked for leaks. A cover sits on top: a flat disc, hemmed and eyeleted, that keeps light, debris and rain out and stops a tank losing heat overnight. We cut and weld discs and panels, so a liner to a drawing goes through the custom-cover route rather than this page.

For a cover over a tank, three decisions carry the result. Colour: white reflects and keeps the water cooler in sun; black is chosen where the aim is to cut light and stop algae, and it also warms faster. Weight: 250 GSM holds a span over open water without bellying into it; 150 GSM will not. Where the water goes: a disc that sags in the middle collects rain, so either the cover is tensioned at the rim or it is pitched — and a centre eyelet is not the answer, because a hole at the lowest point is a hole in the cover.

For ponds and above-ground pools the arithmetic is the same, but the skirt is longer and the fixings matter more, because a pool rim is a hard edge that chafes. Our pool covers page covers that case in detail; for stacked bales and silage the silage and hay range explains why breathability changes the choice of fabric.

7. What to send with the enquiry

Six numbers settle a round cover quote: the diameter it has to cover, the skirt you want beyond the rim, the material and GSM, the colour, the eyelet spacing, and the quantity. Add the destination port. If it is a stack rather than a tank, send the base diameter and the height, or the path over the crown, and say whether the cover has to reach the ground.

Minimum order is 5 tonnes per specification; diameters within one specification can be mixed, so a mixed pallet of 12 and 16 ft does not each need its own five tonnes. Standard PE runs about 30 days from an approved sample. Fabric samples are free and you cover the courier.

What we do not do: tank liners in the wet zone, sewn drawstring bags, rope-and-pulley lifting systems, and single retail pieces. A full size list across every format is on the sizes and specifications page; the fabrication steps are on the cutting and heat sealing and eyelet and reinforced hem pages. If you buy coated fabric by the metre rather than finished covers, start from the PE range.

FAQ

Frequently asked questions

What diameters can you make?

Six are cut from stock patterns — 8, 12, 16, 20, 24 and 30 ft — and anything from 6 to 40 ft is made to order on the same equipment. The difference is that a non-stock diameter starts with a cutting plan rather than an existing pattern.

Why does a round tarp cost more than a square one of the same area?

Because it is cut from a square blank. A 20 ft disc uses a 20 by 20 ft square, which is 1.27 times the area of the circle, so about a fifth of it leaves as offcut. On top of that the hem per square metre is 4/D, so a small disc carries far more hem than a large one.

How many eyelets will my disc have?

At the standard 24 in spacing it is the circumference divided by two feet: 12 rings on an 8 ft disc, 31 on a 20 ft, 47 on a 30 ft. At 12 in spacing those numbers roughly double. Both are quoted, and the choice is yours.

Can I order a round tarp with a drawstring?

No. A drawstring needs a sewn channel, and this range is heat-welded — we do not sew. What we make instead is a welded hem with eyelets and a rope run round it, which gathers the same way and holds better, because the cord is not trapped in a channel that can split.

Do you make round liners for fish tanks?

We cut and weld discs and panels, so a cover is straightforward. A full liner — welded cylinder plus base, with the seam in the wet zone — goes through the custom-cover route and is quoted against a drawing rather than a diameter.

How much bigger than the tank should the cover be?

Add the skirt on both sides. A tank 3.0 m across with a 250 mm skirt each side needs a 3.5 m disc. For a domed stack, measure along the path the cover takes over the crown — a disc cut to the base diameter will not reach the ground.

Which weight should I choose?

150 GSM for small discs and short spans where handling matters, 200 GSM for bale stacks and yard cover, 250 GSM over open water and large spans, 300 GSM where the cover faces wind and crane handling. The weight follows the span, not the price.

What is the MOQ, sampling and lead time?

Five tonnes per specification, and diameters within one specification can be mixed to reach it. Fabric samples are free and you cover the courier. Standard PE takes about 30 days from an approved sample.

Round Tarps & Circular Tarpaulins

Request a quotation

Leading PE tarpaulin factory in China. Specialized in manufacturing high-quality polyethylene tarpaulins.

  • what'sapp: +86 18561818308marketing@roctarpstarp.com
  • Get an instant quote